anyone know whats its called or whre i can find it?

Excuse my drawings

This post has been edited by cheken: Apr 12 2008, 09:01 PM

ROFL, too funny Ken

why not use PVC pipe and plumb it to your pump.

hm.. i guess pvc can work for that piece, i m gonna go to home depot 2morrow. Any other thoughts?

Its called the over flow box!!

no will that is return line from pump i think bro.

yep its the return line from the pump to the top tank. I have a gravity system where there is 3 tank and a sump tank. top tank goes to 2nd etc etc. Only problem is that im having a hard time securing the return line to the top tank. I figure if i can get some sort of clamp or the piece as illustrated, it would secure it without getting lose and flooding the place

why not silicon some kind of clamp to the back of the glass on the outside ken?? Cheap plastic hose clamps even

Heater clamps?

http://www.fishsupply.com/supplies-plumbin...utlet-tube.html

Thanks everyone, shi fu does that 3/4 outlet fit a 3/4 hose?

there are flexible ones like that too ken, but they cost more. If you want to do it cheap, you could make one of those out of PVC for about $1.50 and still connect to a 3/4" hose.

what is that a snake no serious take a3/4 elbo a3/4 by the hieght oftank pvc, elbo 1 side female threadedand the other hud =service 90 then the same the oyher end and a 3/4 grey male 1 side and ribbed the other side for tubiing to the pump

i think they are called return jets. many people ask me for those too. if you cant find them just use a canister return but doesnt look as cool as those black ones

http://www.modularhose.com/ ???

http://www.drsfostersmith.com/product/prod...amp;pcatid=4090
http://www.marinedepot.com/ps_AquariumPage...urn_u-tube.html

This post has been edited by danz: Apr 13 2008, 03:40 PM

Alright, i was able to put something together from home depot, couldnt wait on ordering it from online

Hey Ken, make sure your out take above the water level, if you don't wanna get flooded. coz when you shutdown the power, all the water will return to your W/D filter until your outtake out off water

Good point tung, that was my biggest concern actually. Im glad you reminded me lol. I gotta get a bigger sump to avoid that from happening. Im gotta upgrade it from the 20 i have now to a 30 breeder which is the max the bottom slot will hold.

Thanks for the heads up bro

also 90's restrict the waterflow, if you can get the pvc fill with sand and tape off the ends. Heat up the pvc and bend it to the shape you need and cool it and you wont restrict the waterflow :)